PROPYLMATTE 31SA
Finely micronized PTFE modified polypropylene for consistent matting and gloss control with surface slip, abrasion and burnish resistance
FEATURES AND BENEFITS
- Efficient gloss reduction from satin to matte finish
- Polypropylene improves burnish resistance vs. inorganic flattening agents
- PTFE provides additional abrasion resistance, enhanced lubricity and surface slip
- Density optimized for maximum stability in water based and energy curable systems
- Adds texture in low bake (Low E) powder coatings
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
COMPOSITION
Polypropylene/PTFE
RECOMMENDED ADDITION LEVELS
2.0 - 5.0% depending on the level of gloss reduction desired
SYSTEMS AND APPLICATIONS
Water based, solvent based and energy curable coatings and inks. Industrial coatings (including plastic, metal, masonry and leather); architectural wall and trim paints; stains, sealers and varnishes; wood coatings; printing inks and OPV's (including flexo and gravure); powder coatings; interior and exterior can and container coatings; coil coatings; floor coatings.
TYPICAL PROPERTIES
| Request Sample Download TDS Download SDS | |
| Appearance | White Powder |
| Density at 25 °C (g/cc) | 1.02 |
| Maximum Particle Size (µm) | 31 |
| Mean Particle Size (µm) | 8.0 - 12.0 |
| Melting Point °C | 160 - 170 |
| Natural or Naturally Derived | No |
| NPIRI Grind | 5.0 - 6.0 |
| PTFE (PFAS) free alternatives | PropylMatte 31HD, Micropro 440W |
|
| |
FEATURED PERFORMANCE PROPERTIES
| Compare | |
| Key: Effective Very Effective Extremely Effective |